The MOTOBLUE ZERO SLIP™ COG BELT pulley system was designed to eliminate belt slip at any RPM.

The third generation MOTOBLUE ZERO SLIP™ COG BELT pulley system utilizes a 30mm Kevlar cog belt, cog compressor pulley to drive the supercharger, cog crank pulley, 130mm cog alternator pulley, and cog tensioner pulley. The cog belt is the key to eliminating belt slip. With the belt slip eliminated, low and midrange torque is drastically improved. Top end power at shift points is also just as amazing. Best of all, the cog belt has a distinct and noticeable roots style supercharger sound. Not too loud, but not too quiet either.

The MOTOBLUE™ GEN X COG-BELT Blower Pulley System has never displayed any signs of wear, fatiuge or falure to the Eaton supercharger.

This MOTOBLUE™ GEN X COG-BELT Blower Pulley System comes complete with all components necessary to make the installation simple and straight forward. It can be purchased as a complete system, or if you are running any of the popular lower pulley kits or auxiliary idler kits, it is possible to purchase the cog components separately.

Component list:


1. COG Steel Compressor Pulley (1)
   
   
2. COG Auxiliary Idler Pulley Kit (1)
   
   
3. COG GEN X Idler Pulleys (2)
   
   
4. COG Tensioner Pulley (1)
   
   
5. COG 130mm alternator pulley (1)
   
   
6. COG "QC" Lower Pulley Bracket w/pulley (1)
   
   
7. COG "QC" Lower Pulley Kit (1)
   
   
8. COG 30mm Kevlar belt (1)
   
   
9. Detailed easy to read instruction