 DYNO PROVEN TO PROVIDE THE LARGEST HORSEPOWER GAINS FOR YOUR 2005-10 MUSTANG 4.0L
|
|
| STRATEGY
In keeping with our goal of providing our customers with the best possible value, we have tested a large group of components specifically designed for the 4.0L V6 Mustang.
We have invested many hours evaluating and refining each of the 4.0L V6 Mustang products on our MD Chassis Dyno, to ensure that we could develop as much power as possible, as safely as possible.
The site menu on the left side of this page, lists the clear winners when it comes to “performance vs. dollar” value. Please check back often as we are always developing new ways to create more horsepower.
|  |
RPM Outlet is proud to announce the introduction of Our Dyno Tuned Options™
For the 2005-10 4.0L v6 MUSTANG
|
OPTION A : STAGE I KIT
- BIG AIR / TUNER KIT -
(option revision date 08/20/2009) |
|
|
|
OPTION B : STAGE II KIT
- BIG AIR / PULLEY / TUNER KIT -
(option revision date 08/20/2009) |
|
|
|
OPTION C : STAGE III KIT
- LONG-TUBE HEADER UPGRADE -
(option revision date 08/20/2009) |
|
|
|
OPTION E : The E KIT
- The e Kit -
(option revision date 08/20/2009) |
|
|
|
|
Aluminum Coolant/Expansion Tank 
Aluminum Power Steering Tank
HardCore UnderDrive Pulley(16+hp)
Line-Loc / Brake Control Kits
Stainless Steel Hood Pin Kits 
SVT Mustang Door Sill Plates
Synthetic Motor Oil / Gear Fluids 
S&B Performance Intake (9+hp)
COLD-AIR/83mm MAF Kit (11+hp)
K&N Generation II FIPK® (9+hp)
Filters
TRINITY Programmer 
LIVEWIRE Flash Programmer
SPECIAL FORCES Tuning Software 
LAKEWOOD Driveshaft Safety Loop Kit
Rear End Girdle and Stud kit 
Stainless 1-5/8 Shorty Header Kit
Short-Tube/CAT4WARD® Header
American Thunder Axle-Back™ Kit 
GaugeWorks Pillars and Pods 
2 1/16 inch dia. Gauges
Wideband air/fuel with data-logger
Copper / Iridium Spark Plugs 
™ Nitrous Oxide Systems (35-175 hp)
NITROUS OXIDE Kit (75-175 hp)
Boost Coolers 
Caster-Camber / Wheel Spacer Kits 
Drag Radials / Drag Slicks
Dual- Friction Clutch Kits
TCI StreetFighter Ratchet Shifter 
