STRATEGY

In keeping with our goal of providing our customers with the best possible value, we have tested a large group of components specifically designed for the 1999-04 SVT Lightning and 2002 - 03 Harley Davidson Truck.

We have invested hundreds of hours evaluating and refining each of the 5.4L engine and chassic products on our own MD-600 Chassis DYNO, and at race tracks coast to coast to ensure that we would develop as much power as possible, and as safely as possible. End result is our now available "Dyno Tuned Options".

The site menu for the 1999-04 SVT Lightning and 2002-03 Harley Davidson Truck on the left side of this page, lists the clear winners when it comes to “performance vs. dollar” value. Please check back often as we are always developing NEW ways to create more horsepower for your vehicle.

MOTIVE GEAR ring and pinion sets for our V8 enthusiasts. These sets will greatly improve your acceleration and will bring your car up to a new level of performance.

All MOTIVE GEARS are CNC-cut from 8620 gear steel, factory lapped for presision fit, and Rockwell tested for hardness.

Gear Ratio + Tire Height=RPM: Click-Here for Gear Ratio Chart. This is a great tool when deciding what gear ration would be best for your application.

MOTIVE GEAR Lightning/Harley V-8
• 9.75" Gear Set 4.10 ratio

MOTIVE GEAR MASTER DIFFERENTIAL BEARING KIT: (Timkin brg.)
• Front & Reat Pinion Bearing, Pinion Seal
• Carrier Bearings, Carrier Shims
• Differential Bearings, Ring Gear Bolts
• Brush, Gear marking compound, Crush sleeve, Pinion nut
• Loctite and cover gasket or rtv

Ford Racing
• 4-ounce friction modifier for Posi-Traction (Traction Lok)

We are proud to announce an exciting new product that works great And is priced right! RPM now offers TA Performance Products Rear End Girdles. This innovative rear end girdle is designed with performance and ease of installation in mind.

TA Performance Girdles keep bearings and ring gears in place. Also, the incorporated, adjustable swivel "feet" load bolts prevent bearing cap movement and breakage, and ensure proper pinion depth and backlash.

TA Performance Girdles are made of 356 aircraft grade aluminum, heat treated to T6 specifications and are machined using a 3 step CNC process ensuring accuracy and quality. Each cover is hand deburred and inspected for the utmost in fit and finish, hand assembled and packaged.

TA Performance Girdles incorporate a Fill Port and a Drain Port for ease of servicing with an increase fluid capacity approx. 1/2 pint lowering rear end operating temperature an average of 15 degrees.

Complete with mountings hardware, reusable gasket and everything needed to do the job right. Installs in minutes with simple hand tools

Features:


• 356 aircraft grade aluminum, heat treated to T6 specifications
• 3 step CNC process, which ensures accuracy and quality
• incorporate a Fill Port and a Drain Port for ease of servicing
• All Girdles incorporate 2 load bolts with swivel "feet" for supporting the bearing caps
• Mountings hardware/reusable gasket
• All Girdles show a decrease in operating temperature, average of 15 degrees
• Easy 30 minute installation
• Everything needed to do the job right

TA Performance Products Rear End Girdle
• 97 & Up Ford Lightning/Harley Truck, Navigator, Expedition and Other Ford Trucks as equipped

T/A Bearing Cap Std Kits
• Replaces stock bolts on carrier bearing caps. Also includes nuts and washers.

Ford Racing
• 4-ounce friction modifier for Posi-Traction (Traction Lok)