|
Simply mouseover and click-on SEARCH link for your specific vehicles performance options.
|
|
Emissions Legal High Flow Catalytic Converters Have you been looking for a true 49 states emissions legal catalytic converter that would
increase horsepower and torque along with keeping the emissions at a OBDII Compliant level. Your search is over Check it out these low flow restriction, compact size, high-flow, stainless steel catalytic converters!

These power packed mini converters are packed in a small and compact polished stainless steel housing, and weight only 2.0 pounds. Higher than factory converter flow rates (as much as 54%) when
and most after market converters.
long.
All this performance weighs a mere 2.5 lbs and measure only 11” installed, they only take up 7” in length. Rated at 4,500 lbs capacity, Seamless case design
makes for a sturdy converter that wont rattle. Stainless steel construction resist corrosion and extends the lifespan of the product. FYI: These High Flow Ceramic/Metallic Catalytic Converters are 49 states emissions compliant
and will pass in most states emissions testing procedures. However, check your local and state ordinances for installation and usage regulations.
|
 |
 |
Polished T409 Stainless Ceramic Mini-Cat
- Ceramic substrate construction, Polished stainless steel housing
- Universal 2.5" OD and ID design, installed length 7' long
- 49 State OBDII Compliant universal catalytic converter
- Includes welded 02 bung/plug and single stainless band clamp
FYI:Ceramic substrate supports 500+RWHP.
P/N # PYP-CVM10K1 $ 99.50
|
|
 |
Stainless Ceramic Mini-Cat Includes stainless steel heat shield
- Ceramic substrate construction, Oval stainless steel housing
- Universal 3.0" OD and ID design, installed length 9' long
- 49 State OBDII Compliant universal ceramic catalytic converter
- Includes welded 02 bung/plug and stainless heat sheild
FYI:Ceramic substrate supports 550+RWHP.
P/N # MAG-94139 $ 69.50
|
|
 |
Stainless Ceramic Mini-Cat Includes stainless steel heat shield
- Ceramic substrate construction, Oval stainless steel housing
- Universal 2.5" OD and ID design, installed length 9' long
- 49 State OBDII Compliant universal ceramic catalytic converter
- Includes welded 02 bung/plug and stainless heat sheild
FYI:Ceramic substrate supports 550+RWHP.
P/N # MAG-94136 $ 69.50
|
|
 |
Stainless Ceramic Mini-Cat Includes stainless steel heat shield
- Ceramic substrate construction, Oval stainless steel housing
- Universal 2.25" OD and ID design, installed length 9' long
- 49 State OBDII Compliant universal ceramic catalytic converter
- Includes welded 02 bung/plug and stainless heat sheild
FYI:Ceramic substrate supports 550+RWHP.
P/N # MAG-94134 $ 69.50
|
|
 Spun Metallic Converters (49-state legal)
Are Looking to gain horsepower but worried about failing emissions testing? Magnaflow's engineers have taken the challenge and developed a revolutionary new compact catalytic
converter design for use in tight places.
Magnaflow fabricated their metallic converter from a single CNC-formed laser-welded tubular section, which is then spun into a 5" round converter
body shape. Each converter is literally manufactured around the Metallic catalyst, which is securely tucked inside,
and necks down to thicker gauge material at the inlet/outlet for maximum durability. Converters contain the properly loaded Metallic catalyst for optimum CFM and are OBDII 49-state compliant for
engines up to 6.2L of displacement.
Note: These catalytic converters are no longer legal for sale in the state of California and will not be shipped to the state of California.
|
|
 |
MagnaFlow Short Center Spun Metallic Spun-Mini-Cat
- Metallic substrate construction for maximum CFM flow
- Universal 3.00" OD and ID design, installed length 5-¾' long
- 49 State OBDII Compliant universal catalytic converter
FYI:Metallic substrate support 6.2L and 700+RWHP.
P/N # MAG59959 $ 79.50
|
|
 |
MagnaFlow Short Center Spun Metallic Mini-Cat
- Metallic substrate construction for maximum CFM flow
- Universal 2.50" OD and ID design, installed length 5-¾' long
- 49 State OBDII Compliant universal catalytic converter
FYI:Metallic substrate support 6.2L and 700+RWHP.
P/N # MAG59956 $ 79.50
|
 |
MagnaFlow Short Center Spun Metallic Mini-Cat
- Metallic substrate construction for maximum CFM flow
- Universal 2.25" OD and ID design, installed length 5-¾' long
- 49 State OBDII Compliant universal catalytic converter
FYI:Metallic substrate support 6.2L and 700+RWHP.
P/N # MAG59955 $ 79.50
|
 |
MagnaFlow Short Center Spun Metallic Mini-Cat
- Metallic substrate construction for maximum CFM flow
- Universal 2.00" OD and ID design, installed length 5-¾' long
- 49 State OBDII Compliant universal catalytic converter
FYI:Metallic substrate support 6.2L and 700+RWHP.
P/N # MAG59954 $ 79.50
|
| | |
Stainless Steel Exhaust Band Clamps
Made in the USA, patented
stainless band clamps are great for applications that require frequent un-installs. Smooth transition taper allows proper fit to seal expanded slip-fit connections.
These are great for mufflers, tailpipes, merge pipe, and cat converter connections.
All stainless preformed/and flat band clamps and are easy to install and disassemble,along with icreased sealing
unlike U-clamps style clamps. Preformed/and flat band clamps band allows for the use of O.D. components (exhaust pipe) to I.D. components (muffler, converters).
|
 |
FYI: Unique design won't crush pipes, assuring smoother exhaust flow. Pre-attached Grade 8 bolts included for easy installation.
Featuring
- Stainless steel material withstands high temperatures and provides better looks.
- Easier to install than competitive styles.
- Pre-attached hardware for easy installation.
- Grade 8 bolts for high temperature durability.
- Unique design won't crush pipes.
Stainless FLAT Style Band clamp 3.00-in Dia.
P/N # HVC24F $ 9.50
|
Stainless FLAT Style Band clamp 2-½-in Dia.
P/N # HVC20F $ 9.50
|
Stainless PREFORMED Style Band clamp 3.00-in Dia.
P/N # HVC24 $ 9.50
|
Stainless PREFORMED Style Band clamp 2-½-in Dia.
P/N # HVC21 $ 9.50
|
|
|
|